Tools fabricated for other projects

Platform made from 2" by 4" wood to provide a secure place to locate a car jack. Necessary when you have to jack the car up higher than the standard bottle jack will allow. The lengths of 2X4 are glued and screwed together.



Some chocks to secure the vehicle when using the jack.



12v electrical circuit tester made from an old motorbike indicator



Drift/punch used to knock out bicycle BB30 bottom bracket bearings. The round end of the drift locates against the special tool required to knock out BB30 bearings used on bikes like Cannondale Scalpel.



LED worklight stand.





Tool for adjusting air/fuel mix on KTM 250 EXC-F. Click here for more details.





Back to Home Page